"Maker of Vintage, Antique Old Toy Trucks" Made in the USA Since 1947

Made in the U.S.A.

Click here for enlarged view!	This is the base painted red with black seats
Click here for enlarged view!	Use a pop rivet or 4-40 tap and screw to install the dash
Click here for enlarged view!	Add the dash assembly using pop rivets or 4-40 screws Add the headlights with jell super glue Put one side of the double sided tape to back of seats
Click here for enlarged view!	If you are adding a tool box cover use the double sided tape. We use 3m VHB double sided tape	Click here for enlarged view!
Click here for enlarged view!	Mark and drill the 1/16 hole for mirrors
Click here for enlarged view!	Attach the KENWORTH emblems
Click here for enlarged view!	Tap in the radiator cap and glue in the running lights
Click here for enlarged view!	Assemble the front axle assembly
Click here for enlarged view!	Put the small spacer on the spindle and set the frame on the front axle assembly. Press on the black retainers. Next add the steering arm and small black retainer	Click here for enlarged view!
Click here for enlarged view!	Here is a close up view of the assembled front axle assembly
Click here for enlarged view!	Mount the front bumper in the two holes in the frame, using the two retaining clips	Click here for enlarged view!
Click here for enlarged view!	Add the two walking beams and the chromed retainers. You can tap or squeeze the retainers onto 1/4 shaft
Click here for enlarged view!	Assemble the duals on the axle for the rear axle assembly and insert the spacer. Then insert the axles into the walking beam. Use a 1/2 inch socket and carefully push the chromed retainers on the axles.
Click here for enlarged view!	Screw the fuel tanks on to the mounting brakets on the frame
Click here for enlarged view!	Mount the mud flaps on to the rear of the frame. Remove the tail lights from the adhesive backing and position them on to the rear of the frame.
Click here for enlarged view!		Here is the completed frame
Click here for enlarged view!	If you are using 1/4 fenders, you will need to drill in the frame and screw the 1/4 fenders in place
Click here for enlarged view!	Place glue on the 3 mounting towers
Click here for enlarged view!	Remove the tape cover on the rear of the seats and slide cab down into position. Press and wiggle the cab down into place
Click here for enlarged view!	Remove tape cover and press the radiator into place. Hold firmly into place for 10 seconds
Click here for enlarged view!	Place the exhaust angle, mark & drill exhaust 5/64"
Click here for enlarged view!	Use the 3 self taping screws to fasten cab assembly to frame. Use a small amount of lubricant on the threads
Click here for enlarged view!	Screw the cab on the frame
Click here for enlarged view!	Slide the J-Hook up through the hole in the cab roof and into the slot in the steering mechanism
Click here for enlarged view!	Mount the air horn on the top of the J-Hook shaft and tap in the horn set screw
Click here for enlarged view!	Click here for enlarged view!
Here is a assembled unfinished tractor with fifth wheel kit that sells for $350 The optional sleeper is made from machined solid aluminum $65	The sleeper is attached to the frame with four screws
Click here for enlarged view!	Rear view of the completed cab mounted on the frame
Click here for enlarged view!	Front view of the completed cab mounted on the frame
Click here for enlarged view!	Click here for enlarged view!
Mount the tank on the truck frame with these screws
Click here for enlarged view!	Tank mounted on the Kenworth frame

The base price for this limited truck and one trailer is $899 plus any options.
Please allow $20 for shipping, handling and insurance.

Thank you for your interest in this American made product. It will be something special in your collection.
Call Pat or Howard at 503-399-8609 and order your tanker today.

All American Toy Co. 540 Lancaster SE Salem, OR 97317  U.S.A.

Locate Us on a Map

All American Toys for the All American Boy Made in the U.S.A. since 1947

All American Toy Trucks are intended for Adults 18 to 118 years. Not recommended for children.

This web site illustrates what is available in our unique limited editions. For further information or to reserve a future limited edition, contact Patrick Russell at 540 Lancaster S.E., Salem, Oregon 97317 U.S.A., or call 503-399-8609.